WAITING
Search for articles
search


Research article
|
|
Influence of EngageĀ® copolymer type on the properties of EngageĀ®/silicone rubber-based thermoplastic dynamic vulcanizates
U. Basuli, T. K. Chaki, K. Naskar
Vol. 2., No.12., Pages 846-854, 2008
DOI: 10.3144/expresspolymlett.2008.99
Corresponding author: K. Naskar

GRAPHICAL ABSTRACT

ABSTRACT

Thermoplastic vulcanizates (TPVs) are a special class of thermoplastic elastomers, which are produced by simultaneously mixing and crosslinking a rubber with a thermoplastic polymer at an elevated temperature. Peroxide-cured TPVs based on blends of silicone rubber and thermoplastic Engage of two different types, mainly ethylene-octene and ethylenebutene copolymers at different blend ratios have been developed. A detailed comparative study of ethylene-octene vs. ethylene-butene based TPVs are mainly focused in this paper. These TPVs exhibit very good overall mechanical and electrical properties. With increasing amount of Engage in the blends at a fixed concentration of peroxide and coagent, tensile strength, modulus and hardness of the TPVs were found to increase considerably. Ageing characteristics and recyclability of silicone rubber based TPVs are also found excellent. Rheological studies confirm the pseudoplastic nature of these TPVs.
Published by:

Budapest University of Technology and Economics,
Faculty of Mechanical Engineering, Department of Polymer Engineering